Using The Thermometer; Changing Setup Options; Entering And Exiting Setup - Fluke 54 Series II User Manual

Using the Thermometer

1. Plug the thermocouple(s) into the input connector(s).
A
2. Press
After 1 second the thermometer displays the first reading.
If no thermocouple is plugged into the selected input or the
thermocouple is "open," the display shows
"- - - -."

Changing Setup Options

Use Setup to change the logging interval, thermocouple
type, offset, sleep mode, time, and line frequency settings.
The thermometer stores the settings in its memory. Setup
settings reset only when the batteries are removed for
more than 2 minutes.
1.800.561.8187
to turn on the thermometer.
www.

Entering and Exiting Setup

When the thermometer is in Setup mode, the display
shows s.
• D
Press to start or exit Setup.
K N
Press or
want to change.
Setup is disabled in MIN MAX mode.
information@itm.com
.com
53 & 54 Series II
Using the Thermometer
Notes
to scroll to the setup option you
9