Changing The Thermocouple Type; Changing The Offset - Fluke 54 Series II User Manual

Changing the Thermocouple Type

K
1. Press
E
2. Press
The currently selected thermocouple blinks.
K
3. Press
appears on the display.
E
4. Press
1.800.561.8187
N
or until the display shows TYPE.
to display the thermocouple type choices.
N
or until the thermocouple you want
to store the thermocouple type in memory.
www.

Changing the Offset

You can adjust the thermometer's readings to compensate
for the errors of a specific thermocouple. See "Using the
Offset to Adjust for Probe Errors." The allowable
adjustment range is ± 5.0
Model 54: You can store individual offsets for T1 and T2.
K N
1. Press or
T1 or T2.
E
2. Press to indicate that you want to change the
offset setting.
The temperature measurement plus the offset
appears in the primary display. The offset appears in
the secondary display.
K N
3. Press or
correct reading.
E
4. Press to store the offset setting in memory.
Remember to reset the offset to 0.0 when it is no longer
needed. The offset automatically resets to 0.0 when you
change the thermocouple type.
information@itm.com
.com
53 & 54 Series II
Changing Setup Options
o C or K, and ± 9.0 o
F.
until the display shows O and
until the primary display shows the
11