Cleaning, Inspection And Repair Of Nose Gear Door Assembly - Piper Lance II Service Manual

1617
LANCE II SERVICE MANUAL
AFT DOORS ON
32RT-300T ONLY
1. DOOR, GEAR FORWARD
2. SPRING
3. ARM
4. LINK ASSEMBLY
5. STRIKER
6. CHANNEL ASSEMBLY
7. SUPPORT ASSEMBLY -
8. PIN, HINGE
9. ADJUSTMENT
BOLT
10. JAM NUT
11. DOOR, GEAR AFT
Figure 7-6. Nose Gear Doors
7-15. CLEANING, INSPECTION AND REPAIR OF NOSE GEAR DOOR ASSEMBLY.
a. Clean all parts with a suitable cleaning solvent.
b. Inspect doors for damage, loose or damaged hinges and brackets.
c. Inspect door retraction link assemblies and arms for damage and wear.
d. Check the door tension springs for wear and tension. Reject springs if tension does
not maintain the doors in the full open position.
e. Repairs to the doors may be replacement of hinges and painting.
f. Repairs to the retraction mechanism is limited to replacement of parts, and sanding
and painting.
ISSued: 1/3/78
LANDING GEAR AND BRAKE SYSTEM
1J23