Control Panel - Bosch HLL09.020U Instruction Manual

The control panel
Controls
Main switch
#
Selecting a hotplate
ø
Adjustment fields
A / @
PowerBoost function
à
Timer function
0
Childproof lock
D
Indicators
Operating status
‹
Heat settings
‚ - Š
Residual heat
• / œ
Hotplates
Simple hotplate
$
Only use cookware that is suitable for induction cooking; see section ~ "Induction cooking"
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch a
hotplate while the residual heat indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
Display : High temperature
•
■

Control panel

Details may vary depending on the appliance model.
Use cookware that is a suitable size
Getting to know your appliance
Indicators
PowerBoost function
›
Timer
‹‹
Touch controls
Touching a symbol activates the associated function.
Notes
Always keep the control panel clean and dry.
■
Moisture reduces its effectiveness.
Do not place any cookware near the indicators or
■
sensors. The electronics could overheat.
The hotplates
Display : Low temperature
œ
■
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will stay lit for as
long as the hotplate is still warm.
en
13