ZIEHL-ABEGG AM-LON Operating Instructions Manual
ZIEHL-ABEGG AM-LON Operating Instructions Manual

ZIEHL-ABEGG AM-LON Operating Instructions Manual

Communication module for ecblue fans

Advertisement

Quick Links

english
AM-LON
Part.-No. 349049
Communication module for ECblue fans
Operating Instructions
L-BAL-E166-GB 1610 Index 002
Part.-No. 00163375-GB

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AM-LON and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ZIEHL-ABEGG AM-LON

  • Page 1 AM-LON Part.-No. 349049 Communication module for ECblue fans Operating Instructions L-BAL-E166-GB 1610 Index 002 Part.-No. 00163375-GB...
  • Page 2: Table Of Contents

    Communication ........5.3.1 Connecting at the AM-LON Modul ....®...
  • Page 3: General Notes

    ZIEHL-ABEGG SE is not liable for damage due to misuse, incorrect or improper use. 2 Safety instructions Information Mounting, electrical connection, and start-up operation may only be carried out by an electrical specialist in accordance with electrotechnical regulations (e.g.
  • Page 4: General Description

    3.2 Function ECblue fans with integrated auxiliary module AM-LON offer the following func- tions: • The “AM-LON” module can be used to communicate with the controller of the fan. ® • ECblue fans can be integrated into existing LON networks.
  • Page 5: Mounting The Module

    Operating Instructions AM-LON Mounting the module 4 Mounting the module Danger due to electric current • Always read the safety instructions chapter before mounting! • The terminating device (fan, converter) in which the module is to be installed must be disconnected from the line voltage for at least 3 minutes before opening! Attention, electrostatic sensitive devices! •...
  • Page 6: Electrical Installation

    The voltage supply to the add-on module is provided automatically by the connector to the base board. No other voltage sources are necessary. 5.3 Communication 5.3.1 Connecting at the AM-LON Modul ® The two-wire lead of the LON -bus is connected to terminals “NET_A” and “NET_B”.
  • Page 7: Wiring And Terminating Resistor In The Lon Network

    Operating Instructions AM-LON Electrical installation ® 5.3.2 Wiring and terminating resistor in the LON network With bus wiring, a terminating resistor of 100 Ω / ≤ 0.25 W must be fitted to the beinning and end of the line. Information The stub lines to the individual devices should be kept as short as possible (max.
  • Page 8: Enclosure

    Operating Instructions AM-LON Enclosure 6 Enclosure 6.1 Connection diagram AM-LON ® Service Pin max. 5 VDC ® Service Pin MOLN07K0 15.03.2011 max. 5 VDC L-BAL-E166-GB 1610 Index 002 Part.-No. 00163375-GB...
  • Page 9: Manufacturer Reference

    Operating Instructions AM-LON Enclosure 6.2 Manufacturer reference Our products are manufactured in accordance with the relevant international regulations. If you have any questions concerning the use of our products or plan special uses, please contact: ZIEHL-ABEGG SE Heinz-Ziehl-Straße 74653 Künzelsau...

Table of Contents