Table of Contents
Advertisement
(866) 433-6682 • (281) 359-8538 • sales@novatech-usa.com • www.novatech-usa.com
7.11 Display Contrast Setting
From the Display Contrast setting you adjust the display contrast to give the best clarity and
readability of the display screen.
Home Screen
Configure
Contrast – Adjust this value up or down to give you the best display contrast.
7.12 Gallons or Liters
Home Screen
Configure
Gal/lit – Set how the controller should display the water meter units of measure.
7.13 Scrolling
From the Display Scrolling setting you can adjust how frequently the controllers display will
scroll from one timer's status to the next timer on the home screen.
Home Screen
Configure
Scrolling – Set the number of seconds to scroll.
7.14 Totalizers
From the Totalizers screen you can view the totalized values of each of the five possible water
meter inputs and reset them if desired.
Home Screen
Configure
Reset – Sets the totalizers back to zero.
72-910-23 Rev.F
Page 19 of 30
Contrast
26
Cancel |Enter
Contrast
√Gallons
Liters
Cancel |Enter
Gal/Lit
Scrolling
03 Sec
Cancel |Enter
Scrolling
Water Mtr #1: 000000000
Water Mtr #2: 000000000
Water Mtr #3: 000000000
Water Mtr #4: 000000000
Totalizers
Water Mtr #5: 000000000
Cancel |Reset
Advertisement
Table of Contents
Need help?
Do you have a question about the Pulsafeeder MicroVision Timer and is the answer not in the manual?
Questions and answers