Rollplay 12V COLORADO W451 Owner's Manual And Assembly Instructions
Rollplay 12V COLORADO W451 Owner's Manual And Assembly Instructions

Rollplay 12V COLORADO W451 Owner's Manual And Assembly Instructions

12v colorado

Advertisement

Owner's Manual and Assembly Instructions
Model #: W451, W451- W451-01, W451-F-01, W451-02, W451-F-02, W451-03, W451-F-03
Read and understand the entire manual before assembly and operation. The vehicle must be
assembled by an adult who has read and understands the instructions.
Made in China.
Styles and colors may vary. Do not return to store. Email customerservice@rollplay.com for
assistance and replacement parts.
IMPORTANT:
Save this manual with your sales receipt.
®
12V COLORADO

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 12V COLORADO W451 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rollplay 12V COLORADO W451

  • Page 1 Read and understand the entire manual before assembly and operation. The vehicle must be assembled by an adult who has read and understands the instructions. Made in China. Styles and colors may vary. Do not return to store. Email customerservice@rollplay.com for assistance and replacement parts. IMPORTANT:...
  • Page 2 Introduction Thank you for purchasing this vehicle from Rollplay. We hope the rider enjoys it for miles to come. Please read this instruction guide carefully before assembling and operating the vehicle. Please have your model number and serial number ready before calling. Please have proof of purchase.
  • Page 3 Contact Customer Service if you need assistance or replacement parts. Please have your model number and serial number ready before calling. Please have proof of purchase. Keep your sales receipt or register your product at www.rollplay.com as we may require proof of purchase. customerservice@rollplay. 1-888-982-9309...
  • Page 4: Table Of Contents

    Table of Contents Safety ............5 Parts ............7 Charging Instructions .......8 Assemble the Rear Wheels .......9 Assemble the Front Wheels ....10 Attach the Truck Bed ......11 Attach the Mirrors ........12 Attach the Windshield and Dashboard ..13 Attach the Steering Rod ......14 Assemble the Steering Wheel ....15 Attach the Doors ........16 Battery Attachment .........17...
  • Page 5: Safety

    Safety WARNING: SAFETY RIDING RULES The user must follow all safety rules and guidelines, or serious injury or death may occur to the user. • Always use common sense and safe practices when using the vehicle. The user must be at least 3 years old and weigh no more than 59 kg (130 lb). •...
  • Page 6 Safety (Continued) WARNING: BATTERY SAFETY • Battery posts, terminals and related accessories contain lead and lead • Contact exposure to battery leakage (lead acid) may cause serious injury. Immediately contact your doctor if exposure occurs. If the chemical is on the skin, immediately give the person water or milk.
  • Page 7: Parts

    Parts Not Included: • Phillips screwdriver • 2 AA batteries Manual Mirror Screw (2) 12V Battery MP3 Cable Steering Wheel Mirror Nut (2) Rear Wheel (2) Hex Wrench Wheel Cover (4) Blister Pack Front Wheel (2) Windshiels & Dashboard Car Body Right Door Hood Left Door...
  • Page 8: Charging Instructions

    Charging Instructions YOU MUST CHARGE THE BATTERY FOR 24 HOURS BEFORE THE FIRST USE! ONLY AN ADULT SHOULD HANDLE THE BATTERY AND CHARGER. Connect the Battery: 1. Ensure the vehicle is stopped and turned off. 2. Unlock and remove the seat. 3.
  • Page 9: Assemble The Rear Wheels

    Assemble the Rear Wheels Helpful Tip: f you encounter trouble fitting both wheels onto the rear axle, then your rear wheel axle may need to be realigned Locate the washers and wheel nuts on either side of the rear axle. Slide the rear wheel onto the axle. Ensure that the gears on the wheel connect with the gearbox.
  • Page 10: Assemble The Front Wheels

    Assemble the Front Wheels Helpful Tip: Slide a thick washer onto the front axle. Slide the front wheel onto the front axle. The concave side should face inward. Slide the thin washer onto the axle. Using the hex wrench, fasten the nut on the end of the axle and tighten until you can not tighten any more.
  • Page 11: Attach The Truck Bed

    Attach the Truck Bed Take out 12 screws from the blister pack. Turn the truck right-side up so that the wheels are on the ground.
  • Page 12: Attach The Mirrors

    Attach the Mirrors Remove the mirrors from the package. Align the hole on the mirror with the hole on the car Take out the screw (16) and nut (18) from the blister pack, insert the screw into the screw hole and fasten to secure. Repeat steps 1-3 for the other mirror.
  • Page 13: Attach The Windshield And Dashboard

    Attach the Windshield and Dashboard Helpful Tip: Connect the wire connector (A) from dashboard to the wire connector (B) from car body. ut the connector and wires into car body and dashboard. Match the plastic inserts on the dashboard with the four slots on the card body and insert into the car body at a 45 degree angle Click the windshield into place.
  • Page 14: Attach The Steering Rod

    Attach the Steering Rod Helpful Tip: surface to avoid any scratches or damage). Please not Insert the straight end of the steering rod into the steering rod hole on the underside of the . The steering rod should slide all the way through the dashboard Carefully turn the truck back to the position...
  • Page 15: Assemble The Steering Wheel

    Assemble the Steering Wheel WARNING! DO NOT mix old and new batteries. DO NOT mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. Use a Phillips head screwdriver to remove the screw on the battery cover of the steering wheel. Insert two AA batteries into the battery Replace battery cover and use the screwdriver to fasten.
  • Page 16: Attach The Doors

    Attach the Doors Align the left door with the interior facing the inside of the truck. Position the hole on the door over the hole on the truck body and slide the post on the bottom of the door into the hole on the truck body side.
  • Page 17: Battery Attachment

    Battery Attachment Important! charged for a full 24 hours (see page 8 for battery charging instructions).
  • Page 18: Attach The Seat

    Attach the Seat Align the seat over the battery compartment. Ensure the locking mechanism aligns with the holes. Slide the hooks onto the back of the seat into the slots on the car body.
  • Page 19: Operation Instructions

    Operation Instructions Screw Press the left and right steering wheel buttons for horn (a) and engine sounds (b). Press the power switch to turn on the truck. ress the power switch again to turn off the truck. Battery power indicator: Press the power indicator button to check battery level.
  • Page 20: Seatbelt

    Seatbelt To properly fasten the seatbelt, fold side B over the child’s lap. Then fold side A over across the child’s shoulders. Fasten side A to side B and fasten the seat belt with the Velcro. Ensure the seat belt is at a suitable length for comfort and safety.
  • Page 21: Open Tailgate

    Open Tailgate...
  • Page 22: Maintenance

    Maintenance Important Battery and Charger Information • Only an adult who has read and understands the safety warnings may handle and operate the battery and battery charger. Keep away from children. • time. • Recharge the battery immediately after each use. Charge for at least 8-12 hours, but no more than 20 hours.
  • Page 23 • Regularly inspect all vehicle parts to ensure they are in good working condition. • Regularly inspect the charger, cord, plug, and other related parts for damage. • Remove any damaged parts and immediately contact Customer Service for replacement parts. See Service and Repairs on Page 27 for more information.
  • Page 24: Troubleshooting Guide

    Troubleshooting Guide Completely read through the manual and troubleshooting guide before contacting Customer Service. Problem Potential Cause Solution Vehicle does not run Battery is low Recharge the battery Thermal fuse tripped Reset fuse Snap pins are loose Tighten snap pins Loose wires or loose Ensure the battery connectors connectors...
  • Page 25 Problem Potential Cause Solution Vehicle needs a push to Loose wires or loose Ensure the battery connectors start connectors are securely attached. If wires are loose, contact Customer Service “Dead spot” on motor A “dead spot” means electricity is not being delivered to the terminal.
  • Page 26: Fcc Information

    FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
  • Page 27: Service And Repairs

    Hours: 9 AM - 5 PM (CST), Monday - Friday 888-982-9309 Phone: 1- Email: customerservice@rollplay. Web: www.rollplay.com For a list of available replacement parts, please visit www.rollplay.com. WE WILL REQUIRE PROOF OF PURCHASE. Please save your sales receipt or register your product at www.rollplay.com.
  • Page 28: Warranty

    This warranty does not cover, and is not intended to exclude any liability on the part of Rollplay, whether under this warranty or implied by law for any indirect or consequential damages for breach of warranty. Some states may not allow the exclusion or limitation so this limitation may not apply to you.
  • Page 29: Product Registration

    1131 W. Blackhawk St. Second Floor Chicago, IL 60642 www.rollplay.com We will use the information provided only for your warranty. We will not sell, rent or share your personal information. Questions or comments? Contact us at www.rollplay. com or 1-888-982-9309...

Table of Contents

Save PDF