Table of Contents
Advertisement
INSTALL THE IGNITER BATTERY
1. Grasp the cap/botton of the igniter and unscrew it in a
counter-clockwise motion (see below).
2. Install 1 AAA battery with the positive (+) pointing
outward.
3. Screw the igniter cap/button back onto the igniter in a
clockwise motion (see below).
INSTALLATION (continued)
positive(+)
IDENTIFYING THE GRILL CONTROLS
Left Burner Low
Control Knob
Igniter
DROP-SHELF OPERATION
A. To lower the shelf, grasp the middle of the shelf on both
sides and lift upward until the shelf does not move upward
any further. Then allow the end of the shelf to slowly rotate
down as pictured to below.
B. To raise the shelf, perform the opposite of A. above.
Grab the and raise to the horizontal position. The shelf
should slide downward and fi t level with the adjacent
surface.
A
CAUTION:
DO NOT place fi ngers near hinges when opening, raising
or lowering the side shelves.
Right Burner High
Control Knob
Left Burner High
Control Knob
13
Right Burner Low
Control Knob
PCG.rev04282017- 10:53
B
Advertisement
Table of Contents
