Safety Precautions - Promotech PRO 5 PB Operator's Manual

2. SAFETY PRECAUTIONS

1. Before beginning, read this Operator's Manual and complete proper occupational
safety and health training.
2. Use only the air (electric) motor specified in the technical data.
3. Use the machine only in applications specified in this Operator's Manual.
4. The machine must be complete and all parts must be genuine and fully operational.
5. The specifications of the air (power) source must conform to those specified on the
rating plate.
6. Supply the machine with air motor only with clean and lubricated air. The air source
must be equipped with a filter, regulator, and lubricator.
7. Never pull the hose (cord) because this may damage it and result in serious injury.
8. Untrained bystanders must not be present near the machine.
9. Before beginning, check the condition of the machine, air (power) source, supply
hose (power cord, battery), coupling (plug), control components, and tool bits.
10. Avoid unintentional starts. Do not lay the machine so that the motor will start and
never carry the machine with air motor by using the ON/OFF lever.
11. Keep the machine dry and never expose it to rain, snow, or frost.
12. Keep the work area well lit, clean, and free of obstacles.
13. Never use machine near flammable liquids or gases, or in explosive environments.
14. Secure the pipe to prevent it from falling or rolling.
15. Use only tool bits specified in this Operator's Manual.
16. Never use tool bits that are dull or damaged.
17. Install tool bits securely. Remove adjusting keys and wrenches from the work
area before connecting the machine to the air (power) source.
18. Before every use, inspect the machine to ensure it is not damaged. Check whether
any part is cracked or improperly fitted. Make sure to maintain proper conditions
that may affect the operation of the machine.
19. Always use eye and hearing protection, protective footwear, and protective clothing
during operation. Do not wear loose clothing.
20. Operate the machine with an electric motor only when the rotation direction switch
is set to the position shown in Fig. 1. Using left rotation (rotation direction switch
set to the opposite position) may damage the machine.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
This document is protected by copyrights.
7
PRO 5 PB/PBE/PBC