Installing The Motor - Promotech PRO 5 PB Operator's Manual

3.3. Installing the motor

Insert the air motor into the machine (1, Fig. 4a) so that the arbor is placed in the
socket 2, and tighten the motor by rotating it to the left (3).
a)
2
Fig. 4. Installing the air motor (a) and an electric motor (b)
To install an electric motor, slide the clamping ring 4 onto the machine. Then, screw
the driver (5) into the motor and insert the motor into the machine (6) by placing the
arbor in the socket 2, and tighten the clamping ring with the 6 mm hex wrench (7).
Finally, set the rotation direction switch to the position shown in Fig. 1.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
b)
1
3
5
5
This document is protected by copyrights.
11
PRO 5 PB/PBE/PBC
7
5
6
5
5
4