4.11. Small expanding mandrel
Allows machining pipes with internal diameters from 25 mm to 33 mm (0.98–1.30'').
Part number:
TRZ-0472-21-00-00-0
To remove the existing expanding mandrel, loosen the nut and use the 6 mm hex
wrench to loosen the set screw (1, Fig. 3) by at least one turn. Then, rotate the spoke
handles to the left to disengage the mandrel from the machine. Next, install the new
mandrel into the machine (2, 3, 4, 5, Fig. 3).
4.12. Cordless electric motor
Part number:
WRT-000021
(includes two 5.2-Ah batteries)
Copying, using, or distributing without permission of PROMOTECH is prohibited.
This document is protected by copyrights.
25
PRO 5 PB/PBE/PBC