Table of Contents
Advertisement
1. GENERAL INFORMATION
1.1. Application
The PRO 5 PB / PBE / PBC is a pipe bevelling machine designed to mill edges of pipes
made of carbon and stainless steel, aluminum alloys, and copper-nickels. Depending
on the tool bit used, the machine can perform external bevelling, J-bevelling, internal
calibration, and facing pipes from inside diameters of 32 mm (1.26'') to outside
diameters of 114 mm (4.49''). Up to three tool bits can be installed at the same time.
When equipped with an optional 140 mm spindle disk set the machine can bevel
pipes with outside diameters up to 140 mm, and using an optional 75 mm spindle disk,
ratchet wrench, or both, will facilitate working in places hard to reach. An optional small
expanding mandrel will allow machining pipes with internal diameters from 25 mm to
33 mm (0.98–1.30'').
1.2. Technical data
Pressure
Voltage
Air motor
Electric motor
Connection
Air consumption
Power
Pipe diameter
up to 114 mm
Maximum pipe
114–124 mm*
wall thickness for
124–132 mm*
outside diameter
132–140 mm*
Rotational speed without load
Nominal rotational speed
Protection class
Required ambient temperature
Weight with motor
* Available with the optional 140 mm spindle disk set.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
PRO 5 PB
0.6 MPa (87 psi)
–
Modec
NT10RT0851FCA1F-CO
–
CEJN 410 DN 10.4
R 1/2'' BSPT coupling
1400 Nl/min (50 CFM) –
800 W
32 mm ID to 114 mm
OD (1.26–4.49'')
12 mm (0.47'')
10 mm (0.39'')
8 mm (0.31'')
6 mm (0.24'')
180 rpm
90 rpm
–
0–40°C (34–104°F)
10 kg (22 lbs)
This document is protected by copyrights.
3
PRO 5 PB/PBE/PBC
PRO 5 PBE
PRO 5 PBC
–
–
1~ 110–120 V, 50–60 Hz
18 V DC, 5.2 Ah
1~ 220–240 V, 50–60 Hz
–
–
Metabo BS 18 LTX
Metabo BE1100
Impuls
Electrical plug
Battery connection
–
–
1100 W
32 mm ID to 114 mm
32 mm ID to 114 mm
OD (1.26–4.49'')
OD (1.26–4.49'')
12 mm (0.47'')
12 mm (0.47'')
10 mm (0.39'')
10 mm (0.39'')
8 mm (0.31'')
8 mm (0.31'')
6 mm (0.24'')
6 mm (0.24'')
0–50 rpm (gear 1)
–
0–180 rpm (gear 2)
0–90 rpm (gear 1)
–
0–300 rpm (gear 2)
–
II
0–40°C (34–104°F)
0–40°C (34–104°F)
10 kg (22 lbs),
11 kg (24 lbs)
includes battery
Advertisement
Table of Contents
