Facing And Bevelling At The Same Time - Promotech PRO 5 PB Operator's Manual

3.10. Facing and bevelling at the same time

When facing and bevelling is performed at the same time, use either short or long
bevelling tool bit depending on the pipe diameter (Fig. 9).
Fig. 9. Positioning the facing tool bit and a short or long bevelling tool bit
Copying, using, or distributing without permission of PROMOTECH is prohibited.
Short tool bit
Short or long
tool bit
Long tool bit
Long tool bit
Short or long
tool bit
Short tool bit
This document is protected by copyrights.
17
PRO 5 PB/PBE/PBC
F0-30 facing tool bit
Long tool bit
Short tool bit