Usage Constraints; Port Number Constraints; Transmission Path Diagnosis Information; Combination With The Other Modules And Engineering Tool - Toshiba nv series Instruction Manual

Chapter 7 Application Interface
7.2

Usage Constraints

7.2.1

Port number constraints

The EN911 module reserves the following ports.
Port number 10000: PCMP
Use port numbers from 1024 to 65535 other than above.
7.2.2

Transmission path diagnosis information

The EN911 does not support the transmission path diagnosis information
exchange function that the EN811 module has. If transmission path diagnosis
is required, implement it in the application.
7.2.3

Combination with the other modules and engineering tool

The EN911 module is supported in the following PU* modules and SA* modules.
Moreover, the engineering tool is supported in the following versions.
7.2.4

Use of EN911 reset command

When use EN911 reset command by the LD/FBD instruction, specify a controller
operation setting and an I/O node setup to "with fallback". It becomes an error if
a command is executed without fallback.
44
6F8C1400
PU module
ＰＵ８１１
ＰＵ８２１
SA module
ＳＡ９１１
ＳＡ９１２
ＳＡ９３１
ＳＡ９４１
Engineering tool
Japanese Client-server（HET82J4SS）
English Client-server（HET82E4SS）
Japanese Stand-alone（HET81J4SS）
English Stand-alone（HET81E4SS）
Support
○ Firmware (SHTYPE1A) V01.45 or later
-
Support
○ Firmware (SESIO91A) V01.22 or later
○ Firmware (SESIO91A) V01.22 or later
-
-
V4.6.6 or later
V4.6.6 or later
V4.6.6 or later
V4.6.6 or later
Remark
Remark
Support version