Huawei TP48200A-HT15D3 User Manual page 77

Outdoor power system

Hide thumbs Also See for TP48200A-HT15D3:

Table of Contents

TP48200A-HT15D3 Outdoor Power System (Russia,

Megafon)

User Manual

Procedure

Step 1 Open the cabinet door and remove the shell of the door status sensor.

Step 2 Record the positions where the alarm cables connect to the door status sensor, and unscrew

the alarm cables.

Step 3 Unscrew the door status sensor, as shown in

Figure 4-23 Removing the door status sensor

Step 4 Remove the shell of the new door status sensor and remove the screws from the alarm cables.

Step 5 Properly place the new door status sensor at the installation position and tighten the screws.

Step 6 Place the alarm cables in sequence and secure the screws.

Step 7 Reinstall the shell of the door status sensor.

----End

Follow-up Procedure

Check that the door status alarm is cleared.

Issue 02 (2019-02-26)

Figure

4-23.

4 Maintenance

Table of Contents