Huawei TP48200A-HT15D3 User Manual page 56

Outdoor power system

Hide thumbs Also See for TP48200A-HT15D3:

Table of Contents

TP48200A-HT15D3 Outdoor Power System (Russia,

Megafon)

User Manual

Procedure

Step 1 Wear protective gloves.

Step 2 Push the locking latch on the right side of the panel towards the left.

Step 3 Gently draw the handle outwards, and then remove the rectifier from the subrack, as shown in

Figure

Figure 4-1 Removing a rectifier

Step 4 Push the locking latch on the new rectifier towards the left, and pull out the handle.

Step 5 Place the new rectifier at the entry of the correct slot.

Step 6 Gently slide the rectifier into the slot along the guide rails until it is engaged. Close the handle,

and push the locking latch towards the right to lock the handle, as shown in

Figure 4-2 Installing a rectifier

Step 7 Remove the protective gloves.

----End

Follow-up Procedure

Pack the removed component and send it to the local Huawei warehouse.

Issue 02 (2019-02-26)

4-1.

4 Maintenance

Figure

4-2.

Table of Contents