Aiwa CX-ZR525 Operating Instructions Manual page 6

To stand the AM
antenna on a surface
Fix the claw to the slot.
To
position the antennas
FM feeder antenna:
Extend this antenna horizontally in a T-shape and fix its ends to
the wall.
AM
loop antenna:
Position to find the best direction.
Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in the SPEAKERS
terminals.
Do not leave objects generating magnetism near the speakers.
Do not bring the FM antenna near metal objects or curtain rails.
Do not bring the AM antenna near other optional equipment,
the stereo system itself, the AC cord or speaker cords, as noise
will be picked up.
Do not unwind the AM antenna wire.
POSITIONING THE SPEAKERS (For Z-R524)
Standard positioning
@ Front speakers
@ Surround speakers
Place the surround speakers behind the listening area.
To
mount the surround speakers on the wail
Mount each speaker on a spot that can hold its weiaht.
5
ENGLISH
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to the FM 75 Q terminal.
To
connect other optional equipment+ page 19.
THE REMOTE CONTROL
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
R6(AA)
When
to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
If the unit is not going to be used for an extended period of time,
remove the batteries to prevent possible electrolyte leakage.
USING THE REMOTE CONTROL
CD
SHIFT
FUNCTION
To use the SHIFT button on the remote control
Buttons @ have two different functions. One of these functions
is indicated on the button, and the other on the plate above the
button.
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the
button while pressing the SHIFT button.