Connections - Aiwa CX-ZR525 Operating Instructions Manual

CONNECTIONS (FOR Z-R524) 2
Connect the surround speakers to the main unit.
Connect the right surround speaker cord to the SURROUND
SPEAKERS R terminal, and left to the SURROUND
SPEAKERS L terminal.
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage shown on the rear panel
matches your local voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment
first. Then connect the AC cord in the end.
There are no difference between the front speakers and as
well as the surround speakers. Both speakers of its kind can
be connected as L (left) or R (right).
1 Connect the right and left speakers to the main
unit.
Connect the right speaker cord to the SPEAKERS R terminals,
and left to the SPEAKERS L terminals.
I
3
Connect the supplied antennas.
Connect the FM antenna to the FM 75 Q terminals and the
AM antenna to the AM LOOP terminals.
The speaker cord with the white stripe should be connected
4
Connect the AC cord to an AC outlet.
to the 0 terminal and the black cord to the O terminal.
To be continued on page 5.
AM antenna
m
FM antenna
l(i
'+
Q
Surround speaker cord
= Right surround speaker
3
ENGLISH