Step 3: Tv And Video Component Hookups - Sony DAV-C450 Operating Instructions Manual

Step 3: TV and Video Component Hookups

Required cords
Video cord for connecting a TV monitor
Yellow
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components.
White (L/audio)
Red (R/audio)
Jacks for connecting video components
Connect a
TV monitor
VCR
Digital satellite receiver
z
When using the S-VIDEO jack instead of the VIDEO jack
Your TV monitor must also be connected via an S-VIDEO jack. S-video signals are on a separate bus from the
video signals and will not be output through the video jacks.
z
When you are connecting the monitor, projector, or AV amplifier (receiver) having component
video input jacks (Y, P
B
Connect the component via the COMPONENT VIDEO OUT jacks using a component video cord (not supplied) or
three video cords (not supplied) of the same kind and length. You will enjoy accurate color reproduction and high
quality images.
Notes
• When you select AUDIO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but not
from the AUDIO 1 OUT L/R jacks.
• When you use the AUDIO 1 line outputs, please set the system to 2CH STEREO mode. If the system is not in
2CH STEREO mode, the line outputs may not function properly.
To the
MONITOR OUT jack
AUDIO 1 jacks
AUDIO 2 jacks
, C P C )
B, R, R
Yellow
White (L/audio)
Red (R/audio)
continued
GB
23