Step 3: Tv And Video Component Hookups - Sony HT-C800DP Operating Instructions Manual

Step 3: TV and Video Component Hookups

Required cords
Video cord for connecting a TV monitor (supplied)
Audio cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components.
Jacks for connecting video components
Connect a
TV monitor
VCR
TV
z
Connecting the system to a TV (for the customers in Europe only)
Connect the system to your TV using the SCART adapter.
z
When using the COMPONENT VIDEO OUT jacks (Y, P
Your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y, P
accept progressive format signals, you must use this connection and set "COMPONENT OUT" to "PROGRESSIVE"
in "SCREEN SETUP" (page 66).
Notes
• When the mode of the system is not set to "DVD", no signal is output from the COMPONENT VIDEO OUT
jacks.
• When the mode of the system is set to "DVD" and "INTERLACE" is selected in "SCREEN SETUP", the signal
is output from the MONITOR and COMPONENT VIDEO OUT jacks.
• When the mode of the system is set to "DVD" and "PROGRESSIVE" is selected in "SCREEN SETUP", the
signal is output only from the COMPONENT VIDEO OUT jacks.
GB
24
Yellow
White (L/audio)
Red (R/audio)
To the
MONITOR (VIDEO OUT) jack
VIDEO (AUDIO L/R IN/VIDEO IN) jacks
TV (AUDIO L/R IN) jacks
Yellow
White (L/audio)
Red (R/audio)
/C P /C ) instead of the VIDEO jacks
B B, R R
/C , P
B B
/C ). If your TV
R R