Checking The Play Information (Advanced) - Sony DAV-C450 Operating Instructions Manual

Checking the Play
Information
You can check information such as the bit
rate or the disc layer that is being played.
While playing a disc, an approximate bit
rate of the playback picture is always
displayed as Mbps (Mega bit per second)
and the audio as kbps (kilo bit per second).
DVD
DISPLAY
1
Press DVD DISPLAY during
playback.
The Control Menu is displayed.
2
Press X/x to select
(ADVANCED), then press ENTER.
The options for ADVANCED appear.
1 2 ( 2 7 )
1 8 ( 3 4 )
T
OFF
BIT RATE
LAYER
BIT RATE
3
Press X/x to select the items.
For each item, please refer to
"Displays of each item."
• BIT RATE: displays the bit rate.
• LAYER: displays the layer and the
pick-up point.
4
Press ENTER.
GB
56
(ADVANCED)
X/x
ENTER
PLAY
DVD
1 : 3 2 : 5 5
BIT RATE
0 5
To close the ADVANCED window
Select "OFF" in Step 3.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
Displays of each item
By pressing DVD DISPLAY repeatedly, you
can display either "BIT RATE" or
"LAYER," whichever was selected in
"ADVANCED."
BIT RATE
When playing MPEG audio sound tracks
Bit rate refers to the amount of video/audio
data per second in a disc. When the bit rate
level is high, there is a large amount of data.
However, this does not always mean that
you can get higher quality pictures or
sounds.
LAYER
384 kbps
Mbps
10
Indicates the approximate point where the
disc is playing.
If it is a dual-layer DVD, the system
indicates which layer is being read ("Layer
0" or "Layer 1").
For details on the layers, see page 78
(DVD).
BIT RATE
384 kbps
Mbps
0 5 10
BIT RATE
kbps
1000
0
Mbps
0 5 10
Appears when the DVD
has dual layers
Audio
Video
Audio
Video