Sony DAV-C450 Operating Instructions Manual page 72

FRONT
Front speaker distance from the
listening position can be set in
5.0 m/17 ft
0.2 meters (1.0 ft) increments from
1.0 to 15.0 meters (3.0 to 50.0 ft).
Center speaker distance can be
CENTER
moved up to 1.6 meters (5.0 ft)
5.0 m/17 ft
forward closer to the listening
position, in 0.2 meters (1.0 ft)
increments.
Rear speaker distance can be moved
REAR
up to 4.6 meters (15.0 ft) closer to
3.4 m/12 ft
your listening position from the
front speaker position, in 0.2 meter
(1.0 ft) increments.
Notes
• In SPEAKER SETUP, the North American model's
OSD displays both metric and imperial
measurements.The other model display metric
measurements only. The manual shows both.
• When you set the distance, the sound cuts off for a
moment.
• If each of the front or rear speakers are not placed
at an equal distance from your listening position,
set the distance according to the closest speaker.
• Do not place the rear speakers farther away from
your listening position than the front speakers.
xBALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set "TEST
TONE" to "ON" for easy adjustment.
The default setting are underlined.
Adjust the balance between the
FRONT
front left and right speakers (You
CENTER
can adjust from center 6 step left or
right).
Adjust the balance between the rear
REAR
left and right speakers (You can
CENTER
adjust from center 6 step left or
right).
GB
72
xLEVEL
You can vary the level of each speaker as
follows. Be sure to set "TEST TONE" to
"ON" for easy adjustment.
The default settings are underlined.
CENTER
Adjusts the level of the center
0 dB
speaker (–6 dB to +6 dB, 1 dB
increments).
REAR 0 dB
Adjusts the level of the rear
speakers (–6 dB to +6 dB,
1 dB increments).
SUBWOOFER
Adjusts the level of the
0 dB
subwoofer (–6 dB to +6 dB,
1 dB increments).
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system or
press VOL +/–.
xTEST TONE
The speakers will emit a test tone to adjust
"BALANCE" and "LEVEL." The default
settings are underlined.
OFF
The test tone is not emitted from the
speakers.
ON
The test tone is emitted from each
speaker in sequence while adjusting
balance or level.
When you select one of the
"SPEAKER SETUP" items, the test
tone is emitted from both left and
right speakers simultaneously.