Step 3: Tv And Video Component Hookups - Sony DAV-SA30 Operating Instructions Manual

Step 3: TV and Video Component Hookups

Required cords
Video cord for connecting a TV
Audio/video cords (not supplied)
When connecting a cord, be sure to match the colour-coded sleeves to the appropriate jacks on the
components.
Terminals for connecting video components
Connect the
TV
VCR
Digital satellite receiver
Notes
• When you select VIDEO 1 using the FUNCTION button, the signal is not from the VIDEO 1 VIDEO OUT and
AUDIO OUT L/R jacks.
• When the mode of the system is set to "DVD," the signal is output from the S VIDEO OUT or COMPONENT OUT
jacks.
• When the mode of the system is set to "DVD" and "PROGRESSIVE" is selected in "SCREEN SETUP," the signal
is output only from the COMPONENT OUT jacks.
• When recording on another unit connected to the VIDEO 1 AUDIO OUT jacks, do not change the Sound Field
(page 41), press KARAOKE/MPX, adjust the music pitch, or connect/disconnect headphones or a microphone.
Tips
• When using the S video jack instead of the video jacks, your TV monitor must also be connected via an S video
jack. S video signals are on a separate bus from the video signals and will not be output through the video jacks.
• When using the COMPONENT VIDEO OUT jacks (Y, P
must also be connected via COMPONENT VIDEO OUT jacks (Y,P
format signals, you must use this connection and set "COMPONENT OUT" to "PROGRESSIVE" in "SCREEN
SETUP" (page 61).
To the
MONITOR OUT jack
VIDEO 1 jacks
VIDEO 2 jacks
/C
B B
Yellow
Yellow (Video)
White (L/audio)
Red (R/audio)
, P /C ) instead of the video jacks, your TV monitor
R R
/C , P /C ). If your TV accepts progressive
B B R R
continued
GB
17