Creating Your Own Program; Program Play; Using The Front Panel Display - Sony CMT-SE5 Operating Instructions Manual

Creating your own
program

— Program Play

You can make a program of up to 25 steps.

Using the front panel display

1
Press FUNCTION to switch the function
to DVD.
2
Press PLAY MODE in stop mode
repeatedly until "PGM" appears.
3
Press . or > repeatedly until the
desired title or track number appears.
When programming an MP3, press
ALBUM + or – to select album, then press
. or > repeatedly until the desired
track number appears.
4
Press ENTER.
The track is programmed.
The program step number appears,
followed by the last programmed track
number.
5
To program additional tracks, repeat
steps 3 and 4.
6
Press SA-CD/DVD N.
Program Play starts.
Other operations
To
Cancel Program
Play
Add a track to the
end of program
Clear a track from
the end of program
20 GB
Selected track number
Do this
Press PLAY MODE in stop
mode repeatedly until "SHUF",
"PGM" and "ALBM" disappear.
Perform steps 1 to 4 in stop
mode.
Press CLEAR after step 4.
Notes
• When you switch the play mode to "PGM" while
"REP1" is selected, "REP1" is automatically
cancelled.
• Program Play is cancelled when the disc is removed.
Tip
The program you made remains after Program Play
finishes. To play the same program again, press
SA-CD/DVD N. However, the program is cancelled
when you remove the disc.
Using the on-screen display
1
Press PLAY MODE in stop mode
repeatedly until "PGM" appears in the
display.
The Program Display appears on the screen.
Program
1
2
3
4
5
6
7
8
9
10
2
Press B.
"Program 1" is selected.
Program
1
Track
2
1 TRACK1
3
2 TRACK2
4
3 TRACK3
5
4 TRACK4
6
5 TRACK5
7
6 TRACK6
8
7 TRACK7
9
8 TRACK8
10
9 TRACK9
10 TRACK10
When the list of all tracks cannot be
displayed on the window, the jump bar
appears. Press B to select the jump bar icon,
and then scroll the jump bar to display the
rest of the list using v or V. Press b or
RETURN O to return to the track list.
Total Time 0:00
Total Time 0:00
Jump bar