Tuner; Presetting Radio Stations - Sony CMT-SE5 Operating Instructions Manual

Tuner

Presetting radio stations

You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then
manually store the radio frequency of the
desired stations.
1
Press TUNER BAND repeatedly (or
move TUNER lever on the unit to FM or
AM) to select "FM" or "AM".
2
Press TUNING MODE repeatedly until
"AUTO" appears.
3
Press + or – on the remote repeatedly
until the frequency indication starts to
change, then release it.
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. At that time,
"TUNED" and "ST" (for an FM stereo
program) appear.
If "TUNED" does not appear and the
scanning does not stop
Set the frequency of the desired radio
station as described in steps 2 and 3 of
"Manual tuning preset".
4
Press MENU/NO.
5
Press . or > repeatedly to select
"Memory?", then press ENTER.
A preset number flashes. Perform steps 6
and 7 while the preset number flashes.
38 GB
Preset number
6
Press + or – (or move TUNER lever on
the unit to + or –) repeatedly to select
the desired preset number.
7
Press ENTER.
"Complete!" appears.
8
Repeat steps 1 through 7 to store other
stations.
Tip
Press TUNING MODE to stop scanning.
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
1
Press TUNER BAND repeatedly (or
move TUNER lever on the unit to FM or
AM) to select "FM" or "AM".
2
Press TUNING MODE repeatedly until
both "AUTO" and "PRESET"
disappear.
3
Press + or – on the remote repeatedly
to tune in the desired station.
4
Press MENU/NO.
5
Press . or > repeatedly to select
"Memory?", then press ENTER.
A preset number flashes. Perform steps 6
and 7 while the preset number flashes.
6
Press + or – (or move TUNER lever on
the unit to + or –) repeatedly to select
the desired preset number.
7
Press ENTER.
"Complete!" appears.
8
Repeat steps 1 through 7 to store other
stations.