Sony CMT-SE5 Operating Instructions Manual page 21

3
Select the album, or track you want to
program.
x When programming a VIDEO CD/CD/
Super Audio CD
For example, select track "2".
Press v/V or the number buttons to select
"2", then press ENTER.
Total time of the programmed
tracks (except for MP3)*
Program
1 TRACK2
2
3
4
5
6
7
8
9
10
* "– –:– –" appears when an MP3 audio track is
selected.
x When programming an MP3
For example, select track "3" of album "2".
Press v or V to select "2", then press B.
Next, press v/V or the number buttons to
select "3", then press ENTER.
Press b or RETURN O to return to the
album list before pressing ENTER.
4
To program other albums or tracks,
repeat step 3.
5
Press SA-CD/DVD N.
Program Play starts.
When the program ends, you can restart the
same program again by pressing SA-CD/
DVD N.
Other operations
To Do this
Return to Normal Play Press PLAY MODE in stop
mode repeatedly until
"CONTINUE" appears.
Clear a track from the Press CLEAR after step 3.
end of program
Total Time 12:34
Notes
• Program Play function is not available for DVD and
JPEG.
• When you switch the play mode to "PGM" while
"REP1" is selected, "REP1" is automatically
cancelled.
• Program Play is cancelled when the disc is removed.
Tip
You can also perform Repeat Play of the programmed
tracks. Press REPEAT during Program Play, or set
"REPEAT" to "ALL" at the Control Menu screen
(page 19).
GB
21