Using The Remote Control - Sony CMT-SE5 Operating Instructions Manual

Sony operating instructions micro hi-fi component system cmt-se5
Table of Contents

Advertisement

4 Connect the mains lead to mains.
If the plug does not fit your wall socket,
detach it from the plug (only for models
equipped with an adapter).
To turn on the system, press
Note
When you turn on the system, the disc is not pulled into
the disc slot until "No Disc" appears in the display. Do
not attempt to push in the disc until "No Disc" appears,
as this may cause malfunction.
To connect optional components
See page 51.
Inserting two size AA (R6)
batteries into the remote
Notes
• If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
• See page 71 for the location of the remote sensor.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
10
GB

Using the remote control

• Select the item with v/V/b/B and press the
?/1
.
• Normally operate the remote with the cover
Opening the front cover
Pull down the upper right corner of the front
cover on the unit.
center to enter the selection.
In this operation manual, the operation "press
the center to enter the selection" is expressed
as "press ENTER".
closed. Open the cover only when operating
the buttons inside the cover.
Press the center
to enter the
selection (ENTER
button).
Front cover

Advertisement

Table of Contents
loading

Table of Contents