Operation Manual – RRPP
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 RRPP Configuration
When configuring RRPP, go to these sections for information you are interested in:
RRPP Overview
RRPP Configuration Task List
Configuring Master Node
Configuring Transit Node
Configuring Edge Node
Configuring Assistant Edge Node
Displaying and Maintaining RRPP
RRPP Typical Configuration Examples
1.1 RRPP Overview
Rapid Ring Protection Protocol (RRPP) is an Ethernet ring-specific link layer protocol. It
can not only prevent data loop from causing broadcast storm efficiently when the
Ethernet ring is complete, but also restore communication channels among nodes on
the Ethernet ring rapidly when a link is torn down.
Compared with Spanning Tree Protocol (STP), RRPP features:
Expedited topology convergence
Independent of the number of nodes on the Ethernet ring
1.1.1 Basic Concepts in RRPP
Master node
Transit node
Figure 1-1 RRPP networking diagram
Domain 1
Device A
Device B
Port 1
Port 1
Port 2
Port 2
Ring 1
Port 2
Port 1
Port 1
Port 2
Device D
Assistant edge node
1-1
Chapter 1 RRPP Configuration
Edge node
Port 3
Master node
Ring 2
Device E
Port 3
Device C