Programing Cd Tracks; Program Play - Sony CHC-TB10 Operating Instructions Manual

Programing CD tracks

— Program Play

You can make a program of up to 25 tracks.
1
Press FUNCTION repeatedly (or press
CD on the remote) to switch the
function to CD.
2
Press PLAY MODE/TUNING MODE
repeatedly until "PGM" appears.
3
Slide the knob to l or to L (or
press . or > on the remote) until
the desired track number appears.
Playing time of the selected track
Selected track number
4
Press ENTER.
The track is programed.
5
To program additional tracks, repeat
steps 3 and 4.
6
Press CD NX (or N on the remote).
GB
10
To Do this
Press PLAY MODE/TUNING
Cancel Program
MODE repeatedly until "PGM"
Play
and "SHUFFLE" disappear.
Clear a track
Press CLEAR on the remote in
from the end stop mode.
Add a track to
Perform steps 3 and 4.
the end of the
program in
stop mode
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD
NX.
• "- -.- -" appears when the total CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over.