Disassembly Of The Bag-Type Filter - Kärcher Ringler RI 311 W2G Original Operating Manual

Maintenance/Repair
Pos : 12.31.1 /9 Wartung/Ins tandsetzung/RI/Übersc hrift: Aus bau Fl äc henfilter @ 0 \mod_1269607770945_131.doc x @ 3851 @ 2 @ 1
9.6

Disassembly of the bag-type filter

Pos : 12.31.2 /1 Grundlegende Sic her hei tshi nweise/Signal wort-F eld "Hinweis" @ 0\mod_1261404960439_131.doc x @ 905 @ @ 1
Pos : 12.31.3 /1 Grundlegende Sic her hei tshi nweise/Hinweis N etzs tec ker zi ehen @ 0\mod_1261407392098_131.doc x @ 939 @ @ 1
Before starting work remove the plug from the wall socket!
Pos : 12.31.4 /1 Grundlegende Sic her hei tshi nweise/Hinweis Atemschutz @ 4 \mod_1358754071540_131.doc x @ 37562 @ @ 1
Respiratory protection (EN 149:2001)
Pos : 12.31.5 /1 Grundlegende Sic her hei tshi nweise/Hinweis Schutz brille benutz en @ 4 \mod_1358867032229_131.doc x @ 37738 @ @ 1
Use protective glasses (acc. to DIN EN 166 1349-BT)
Pos : 12.31.6 /1 Grundlegende Sic her hei tshi nweise/Hinweis Arbeits handschuhe, War tungs-und Ser vicearbeiten @ 0\mod_1269595688871_131.doc x @ 3760 @ @ 1
Suitable work gloves must always be worn when carrying out maintenance and service tasks,
in order to prevent injuries and soiling with contaminated substances
Pos : 12.31.7 /1 Grundlegende Sic her hei tshi nweise/Hinweis Schutz kl ei dung benutzen @ 4\mod_1358849045279_131.doc x @ 37727 @ @ 1
Use protective clothing (acc. to EN 13982-1)
Pos : 12.31.8 /9 Wartung/Ins tandsetzung/RI/Zeic hnung Flächenfilter Austausc h @ 0 \mod_1269608972851_0.doc x @ 3857 @ @ 1
Pos : 12.31.9 /9 Wartung/Ins tandsetzung/RI/Ar beitssc hritte Flächenfilter tausc hen Wec hs elstrom @ 0\mod_1269610598528_131.doc x @ 3863 @ @ 1
 Rotate the turning handles at drive unit by 180° and remove the drive unit
 Set down drive unit on suitable surface in the position displayed,
 Release the strap (1) and remove together with small baffle plate (2).
 Remove strap (3), and during assembly ensure it is positioned correctly - refer to photo!
 Surface filters (4) remove and seal it in a bin liner.
 Accumulated dirt on the clean air side with a damp cloth to remove
 Install new filter surface (4) (see wear parts list).
Pos : 12.31.10 /9 Wartung/Instands etz ung/RI/D er Z us ammenbau erfolgt i n der umgekehrten Rei henfolge. @ 0\mod_1269600567754_131.doc x @ 3811 @ @ 1
 Assembly occurs in the inverse order.
Pos : 12.32 /0 Allgemeines/Sei tenumbruch @ 0\mod_1265272007940_0.doc x @ 2191 @ @ 1
NOTICE
27/53