Related Manuals for Parker D-Pak
Summary of Contents for Parker D-Pak
- Page 1 Hydraulic Power Units D, H, V-Pak and Custom Power Units HY28-2600-550-M1USA May 2019...
-
Page 2: Table Of Contents
Parker or its subsidiaries or authorized distributors. To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems. -
Page 3: Preparation For Use
It is strongly recommended that any directional If the power unit is not going to be installed Code and any local codes that may apply. The Parker valves controlling the actuators be located as close unless otherwise instructed by the heat exchanger... -
Page 4: Inverter (Dcp) Wiring Information
*The 2Hp and 3Hp motors have a 1.15SF at 60 Hz and 50Hz. Ground connection: This connection Image must be made to a suitable ground (PE) Ground Terminal Parker Hannifin Corporation Parker Hannifin Corporation Hydraulic Pump and Power Systems Division Hydraulic Pump and Power Systems Division United States United States... -
Page 5: Component Location (Typical)
Strainer (inside reservoir) (for customer use, water valve, temperature Tank drain (SAE #12) switch,etc.) Temp/level switch Solenoid unloading valve Parker Hannifin Corporation Parker Hannifin Corporation Hydraulic Pump and Power Systems Division Hydraulic Pump and Power Systems Division United States United States... -
Page 6: Supply And Return Connections
It is the customer’s low pressure. prime the pump and then allow the pump to run Parker oil transfer pumps are available for this purpose. responsibility to select the proper hose or tube for several minutes at minimum pressure. Check... -
Page 7: General Maintenance
Paint – Parker’s standard paint for these units is Sherwin Williams quick dry enamel, F77A3 Machine Tool Grey. - Page 8 VFD. Contact Parker or your local Parker 11. Parker offers an oil sampling kit, which can be distributor for information regarding our Drive used to ascertain the condition of the system fluid.
-
Page 9: D-Pak Parts List
It will prevent the hydraulic system from getting rid of heat. The D-Pak parts list is for standard units, design series Gear pumps, filters and valves should be purchased from 21, with directional valve information excluded. If your their respective source Parker Divisions. -
Page 10: H-Pak Parts List
Gear pumps, filters and valves should be purchased from Rear mt heat ex RM-08-2-2 14, with directional valve information excluded. If your their respective source Parker Divisions. Parts unique to Bracket 875225 (2 pc) unit is a different design series, the form, fit and function... - Page 11 (above 2000 psi), an optional steel manifold and special 15P with a steel head is available. 875576-04 AD03P052S/C AD05P032S/C 875576-05 AD05P052S/C Parker Hannifin Corporation Parker Hannifin Corporation Hydraulic Pump and Power Systems Division Hydraulic Pump and Power Systems Division United States United States...
-
Page 12: V-Pak Parts List
Motor Part Number hvPump Number ^ Pressure Set (PSI) Pump Number ^ Pressure Set (PSI) their respective source Parker Divisions. Parts unique to with directional valve information excluded. If your unit the power unit (variable piston pumps, gaskets, special DG (2) 133-60021-0... -
Page 13: V8, Low Profile Parts List
V-8 (low profile) parts list is for standard units, design ID Number series 13, with directional valve information excluded. their respective source Parker Divisions. Parts unique to 876305 (aluminum) 875576-05 If your unit is a different design series, the form, fit and... - Page 14 208-230/460 3Ph 60Hz | 190/380 50Hz 133-60029-0 V (40) 208-230/460 3Ph 60Hz 875054-28 DV (40) 208-230/460 3Ph 60Hz | 190/380 50Hz 133-60030-0 Parker Hannifin Corporation Parker Hannifin Corporation Hydraulic Pump and Power Systems Division Hydraulic Pump and Power Systems Division United States United States...
-
Page 15: Troubleshooting
(easy access). the drive droops too much, current rise and motor slip will lead to a complete breakdown of motor speed. Parker Hannifin Corporation Parker Hannifin Corporation Hydraulic Pump and Power Systems Division Hydraulic Pump and Power Systems Division United States... -
Page 16: Power Unit Weights
65 lbs. 75 lbs. 7-1/2 100 lbs. 120 lbs. 170 lbs. 200 lbs. 370 lbs. 440 lbs. 505 lbs. Parker Hannifin Corporation Parker Hannifin Corporation Hydraulic Pump and Power Systems Division Hydraulic Pump and Power Systems Division United States United States... -
Page 17: Offer Of Sale
HY28-2600-550-XXX D, H, V-Pak and Custom Power Units D, H, V-Pak and Custom Power Units Notes Offer of Sale Parker Hannifin Corporation Parker Hannifin Corporation Hydraulic Pump and Power Systems Division Hydraulic Pump and Power Systems Division United States United States... - Page 18 © 2019 Parker Hannifin Corporation HY28-2600-5500-M1/USA 5/2019 Parker Hannifin Corporation Hydraulic Pump and Power Systems Division 14249 Industrial Pkwy. Marysville, OH 43040 phone 937 644 3915 fax 937 642 3738 www.parker.com/hps...
Need help?
Do you have a question about the D-Pak and is the answer not in the manual?
Questions and answers