Download Print this page

Parker RC Series Maintenance Instructions

Rodless cylinder

Advertisement

Quick Links

Catalog AU03-0900P-2/NA
Maintenance Instructions
RC Series
Rodless Cylinder
Maintenance Instructions
Note: Before attempting any repairs or modifications to
the rodless cylinder, READ, UNDERSTAND and FOLLOW
ALL maintenance instructions.
The integrity of the inner sealing band is critical to the proper
performance of the rodless cylinder. Care must be exercised
in the handling of this band.
Bore Sizes - 25mm, 32mm, 40mm, 50mm & 63mm
Maximum Operating Pressure – 115 P.S.I. Air
Maintenance Instructions and Service
RC Series
Bore Size
25mm
Tool
Hex Allen
3/32" &
Wrench
1/8"
Screw Driver
Socket
5/16" &
Wrench
3/8"
59
32mm
40mm
50mm
Tool Size
3/32", 1/8" 3/32", 1/8"
3/32", 1/8" & 3/16"
& 1/4"
Flat Blade Type
5/16" &
7/16"
1/2"
7/16"
Parker Hannifin Corporation
Actuator Division
Wadsworth, Ohio USA
63mm
& 1/4"
1/2"

Advertisement

loading

Summary of Contents for Parker RC Series

  • Page 1 Maintenance Instructions and Service Catalog AU03-0900P-2/NA Maintenance Instructions RC Series RC Series Rodless Cylinder Maintenance Instructions Note: Before attempting any repairs or modifications to Bore Size 25mm 32mm 40mm 50mm 63mm the rodless cylinder, READ, UNDERSTAND and FOLLOW Tool Tool Size ALL maintenance instructions.
  • Page 2: Maintenance Instructions

    Maintenance Instructions and Service Catalog AU03-0900P-2/NA Maintenance Instructions RC Series NOTE: THE INTEGRITY OF THE INNER BAND IS CRITICAL TO THE PERFORMANCE OF THE RODLESS CYLINDER. THE EDGES OF THE INNER BAND MUST NOT BE DAMAGED. Disassembly of Cylinder: Remove carriage screws (sym. #1) and nuts (sym.
  • Page 3 Maintenance Instructions and Service Catalog AU03-0900P-2/NA RC Series Maintenance Instructions Photo #6 Photo #7 After the piston/band sub-assembly is completely inserted into the body, posi- tion the band so that an equal length of VIEW A-A VIEW B-B band protrudes from each end of the tube (Photo #8) .
  • Page 4 Tighten the inner band set screws at each end to the recommended torque value (Table C) . Photo #10 Table C RC Series Rodless Cylinder Torque Values (inch - pounds) Note: Rodless cylinder End Cap Band Clamp Inner Band Outer Band...
  • Page 5: Offer Of Sale

    Products, to or from Buyer is subject to these Terms and Conditions or any newer or any other person, arising out of: (a) improper selection, improper application or other version of the terms and conditions found on-line at www.parker.com/saleterms/. Seller misuse of Products purchased by Buyer from Seller; (b) any act or omission, negligent objects to any contrary or additional terms or conditions of Buyer’s order or any other...