Control Elements - AS MOTOR AS 901 SM Operating Instructions Manual

Control elements

6
7
5
2
1
6
Throttle lever (1)
With the accelerator lever, you change the
engine speed and thus control the engine
output.
MAX: Full throttle
MIN: Neutral position
Drive lever with parking brake (2 )
With the drive lever, you switch the drive and
the parking brake on and off.
Drive on / parking brake
off (I):
Press the lever towards
the handlebar and contin-
ue to hold.
Drive off / parking brake
on (0):
Release the lever.
10
3
8
4
Blade clutch lever (3)
The blade clutch lever is a safety device.
When you release the lever the blade comes
to a standstill within 7 seconds
Engaging blade (I):
I
Lift the blade clutch lever,
engage the latch knob (88) and
0
M
press the blade clutch lever
towards the handlebar.
Disengaging blade (0):
Release the blade clutch lever
and set the accelerator lever to
MIN.
Lever for lateral adjustment of handlebar (4)
1. Release the eccentric tension lever.
2. Attention: Do not crush the Bowden cables
when pivoting the handlebar.
Swivel the handlebar to the side to the de-
sired position.
3. Clamp the handlebar with the eccentric
tension lever.
Height adjustment of handlebar
You adjust the height of the handlebar with the
screw for the height adjustment of the handle-
bar (see Assembly).
Engine stop switch (5)
Switch the ignition on and off with the
engine stop switch. When you switch
off the ignition, the engine is switched
off.
0: OFF
I: ON