Transfer Configuration Data - Leuze electronic DCR 248i Original Operating Instructions

• Camera operating mode
Select the Single trigger mode camera operating mode for fast complete decoding.
The adjustment options can be found in the webConfig tool: Configuration > Control > Camera oper-
ating mode
• Max. no. of codes
If the maximum number of codes to be expected in an image (ROI) is small and known, the code
search is accelerated.
Define the maximum number of codes that can be decoded in a test program. If the defined number of
codes has been decoded, the code search algorithm is interrupted.
The adjustment options can be found in the webConfig tool: Configuration > Decoder > Extended
• Image transfer
Deactivation of image transfer in process mode increases the decoding rate.
Adjustment options can be found in the webConfig tool: Configuration > Device > Image transfer
• Search mode
Select the Optimized search mode for fast decoding. This search mode can only be used for 2D-codes.
The adjustment options can be found in the webConfig tool: Configuration > Decoder > Extended
You must then teach the found codes using the [Optimize code] button.
• Color mode
If it is known beforehand whether the codes are printed black on a white background or white on a
black background, you can select the color mode accordingly. Set the Automatic color mode if codes in
both print variants are present.
The adjustment options can be found in the webConfig tool: Configuration > Decoder > Extended
8.6.6

Transfer configuration data

Transferring configuration data with the webConfig tool
With the webConfig tool, you can store complete device configurations on data carriers and transfer them
from these to the device: Maintenance > Backup/Restore
This storage of configuration data is especially useful if you want to store basic configurations which will re-
quire only minor changes.
Leuze electronic
Starting up the device – Basic configuration
DCR 248i 48