AIREDALE LogiCool LCC20 Technical Manual page 15

Chillers
Controls
STANDARD FEATURES
Unit Remote ON/OFF
Compressor Anti Cycle
Control
Compressor Load Limit
Pump(s) Remote
ON/OFF
Remote Setback
Temperature Setpoint
Switch
Compressor Hours Run
Password Protection
CAUTION
OPTIONAL FEATURES
Pump(s) Hours Run
BMS Interface Card
GSM Modem Kit
Disables/Enables the chiller remotely.
Automatic via the Microprocessor.
Limits the condensing pressure by unloading above 35 Barg.
Limits the evaporating pressure by unloading at the minimum pressure setpoint, which is
adjustable depending on system glycol content.
Disables/Enables the pump(s) remotely.
A setback setpoint for supply water temperature can be selected to suit summer/winter
conditions or night setback.
Displays hours run of each compressor.
The control system integrity can be maintained by restricting access with a password
PIN number.
IMPORTANT: To change the PIN number; please contact Airedale at time of order
with the preferred 4 digit number.
Displays hours run of each pump.
Enables Controlled units to be interfaced with most BMS, factory fitted,
please contact Airedale.
A wide range of protocols can be accommodated through the use of interface devices.
Available as a standard option are: ModBus/Jbus, Carel and Trend.
For interfaces such as SNMP, LonWorks, Metasys and BACnet, please contact Airedale.
Also available is Airedale's own supervisory plug-in BMS card pCOWEB.
Based on Ethernet TCP/IP secure technology with SNMP features.
Requires no proprietary cabling or monitoring software and supplied pre programmed
with an IP address for ease of set up.
Allows remote alarm monitoring by sending alarm text messages to a nominated mobile
phone, factory set.
LOGICOOL™
Technical Manual : 6521355 V1.14.0 11/2016
Chillers
15