About Indicators On Display - Sony STR-DG510 Operating Instructions Manual

About the indicators on the display
1 2 3
SP A
SW LFE
SP B
L C R
SL S SR
qd
Name Function
A SW
Lights up when sub woofer
selection is set to "YES" (page
42) and the audio signal is
output from the SUB
WOOFER jack.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C SP A/SP B
Lights up according to the
speaker system used. However,
these indicators do not light up
if the speaker output is turned
off or if headphones are
connected.
D ; D
Lights up when the receiver is
decoding Dolby Digital
signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to "ANALOG" (page 58).
8
GB
4 5
; ;
D PLII
6 7
;
PL OPT DTS
COAX
qs
Name
E ; PL/
; PLII
F OPT
G DTS
8
MEMORY
D.RANGE
qa q;
Function
"; PL" lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
"; PLII" lights up when the
Pro Logic II Movie/Music
decoder is activated.
However, these indicators do
not light up if both the center
and surround speakers are set to
"NO" (page 38) and you select
a sound field using the A.F.D.
button.
Lights up when VIDEO 2 input
is selected. However,
"UNLOCK" appears on the
display if no digital signal is
input through the OPTICAL
jack. "OPT" also lights up
when SAT input is selected if
– INPUT MODE is set to
"AUTO IN" and the source
signal is a digital signal being
input through the OPTICAL
jack.
– INPUT MODE is set to "OPT
IN" (page 58).
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have
made digital connections and
that INPUT MODE is not set to
"ANALOG" (page 58).
9
RDS ST
MONO