Connecting A Tv - Sony STR-DG510 Operating Instructions Manual

Connecting a TV

The image from a video component connected
to this receiver can be displayed on a TV
screen.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Audio signals
OPTICAL
DVD IN
SAT
IN
VIDEO 2/
BD IN
AM
VIDEO IN
SAT
DVD
IN
COAXIAL
DIGITAL ANTENNA
L
R
AUDIO IN AUDIO IN
SA-CD/CD
A Audio cord (not supplied)
B Video cord (not supplied)
C Component video cord (not supplied)
20
GB
TV
A B
VIDEO 2 /BD IN OUT
HDMI
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT SAT IN
DVD VIDEO 1 MONITOR COMPONENT VIDEO
L L
AUDIO OUT
R R
AUDIO OUT AUDIO IN
AUDIO IN
SUB
TV SAT VIDEO 1 WOOFER
Note
Be sure to turn on the receiver when the video and
audio signals of a playback component are being
output to a TV via the receiver. Unless the power is
turned on, neither video nor audio signals will be
transmitted.
Tips
• You can watch the selected input image when you
connect the MONITOR OUT or HDMI OUT jack
to a TV or projector.
• To output the sound of the TV from the speakers
connected to the receiver, be sure to:
– connect the audio output jacks of the TV to the
TV AUDIO IN jacks of the receiver.
– turn off or mute the TV's volume.
Video signals
Y
+
P /C
B B
P /C
R R
DVD IN MONITOR OUT
CENTER
SURROUND
L
+
R
SPEAKERS
C
–
FRONT A
L
R
+
– –
FRONT B
R
SPEAKERS
L