Connecting A Dvd Player - Sony STR-DG510 Operating Instructions Manual

Connecting a DVD player/DVD
recorder
The following illustration shows how to
connect a DVD player/DVD recorder.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.

Connecting a DVD player

Audio signals
A
OPTICAL
DVD IN
SAT
IN
VIDEO 2/
BD IN
AM
VIDEO IN
SAT
DVD
IN
COAXIAL
DIGITAL ANTENNA
L
R
AUDIO IN AUDIO IN
SA-CD/CD TV
A Coaxial digital cord (not supplied)
B Video cord (not supplied)
C Component video cord (not supplied)
DVD player
Video signals
B
VIDEO 2 /BD IN OUT
HDMI
SAT IN DVD IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT
DVD VIDEO 1 MONITOR COMPONENT VIDEO
L L
AUDIO OUT
R R
AUDIO OUT AUDIO IN
AUDIO IN
SUB
SAT VIDEO 1 WOOFER
Notes
• To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
• As this receiver does not have analog audio input
jacks for DVD, connect your DVD player to the
DIGITAL COAXIAL DVD IN jack on the
receiver. To output sound from the front left/right
speakers only, press 2CH.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
C
Y
+ –
P /C
B B
P /C
R R
MONITOR OUT
CENTER
SURROUND
L
+ –
R
SPEAKERS
FRONT A
L
R L
+ –
FRONT B
R
SPEAKERS
continued
21 GB