6: Preparing The Remote - Sony STR-DA7100ES Operating Instructions Manual

3
Press MEMORY/ENTER while
"ENTER to Clear ALL" appears
on the display.
After "MEMORY CLEARING..."
appears on the display for a while,
"MEMORY CLEARED!" appears.
The following items are reset to their
factory settings.
• All settings in the SPEAKER SET UP,
LEVEL, SURR SET UP, EQUALIZER,
CUSTOMIZE, TUNER and CIS menus.
• The sound field memorized for each
input and preset station.
• All preset stations.
• All index names for inputs and preset.

6: Preparing the remote

Inserting batteries into the
remote
Insert three LR6 (size-AA) batteries in the
RM-AAE003 remote control.
Insert two R6 (size-AA) batteries in the RM-
US106A remote control.
Observe the correct polarity when installing
batteries.
RM-AAE003
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix alkaline batteries and other kinds of
batteries.
• Do not expose the remote sensor of the receiver to
direct sunlight or lighting apparatuses. Doing so
may cause a malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
Tip
Under normal conditions, the batteries should last
for about 3 months. When the remote no longer
operates the receiver, replace all the batteries with
new ones.
RM-US106A
45 GB