Sony STR-DA7100ES Operating Instructions Manual page 40

HDMI features
• A digital audio signal can be output from the
speakers and the PRE OUT jack on this
receiver. This signal supports Dolby Digital,
DTS and linear PCM.
• Analog video signals input to the video jack,
S-video jack, or component video jack can
be output as HDMI signals. Audio signals
are not output from HDMI jack at this time.
Notes on HDMI connections
• Check the HDMI AUDIO setting if the
sound is not output from the TV or you
cannot play back multi channel software via
an HDMI connection.
• An audio signal input to the HDMI IN jack
is not output from the REC OUT, the 2ND
ZONE jack, or the 3RD ZONE jack of this
receiver.
• The multi/stereo area audio signals of a
Super Audio CD are not output.
• Be sure to turn on the receiver, when video
and audio signals of a playback component
are being output to a TV through this
receiver. Unless the power is on, neither
video nor audio signals will be transmitted.
• Audio signals (sampling frequency, bit
length, etc.) transmitted from an HDMI jack
may be restricted by the connected
component. Check the setup of the
connected component if an image is poor or
the sound does not come out of a component
connected via the HDMI cable.
• Refer to the operating instructions of each
component connected for details.
40
GB