Naming Inputs - Sony STR-DA7100ES Operating Instructions Manual

Audio input modes
• AUTO 2CH
When there are no digital audio signals, the
analog audio signals input to the AUDIO IN
(L/R) jacks are selected.
• COAXIAL FIXED
Specifies the digital audio signals input to
the DIGITAL COAXIAL jack.
• OPTICAL FIXED
Specifies the digital audio signals input to
the DIGITAL OPTICAL jack.
• ANALOG 2CH FIXED
Specifies the analog audio signals input to
the AUDIO IN (L/R) jacks.
• i.LINK FIXED
Specifies the audio input to the i.LINK
jacks.
• HDMI FIXED
Specifies the audio input to the HDMI jacks.
Notes
• You cannot select the digital audio input assigned
to another function using the DIGITAL ASSIGN
function (page 61).
• Some audio input modes may not be set up
depending on the input.
• A INPUT MODE button does not work when
i.LINK or HDMI input are selected.
60
GB

Naming inputs

You can enter a name of up to 8 characters for
inputs and display it on the receiver's display.
This is convenient for attaching component
names. It will tell you which component is
connected to which jack.
2,3,
4
1
Press INPUT SELECTOR to
select an input you want to
create an index name for.
You can also use INPUT SELECTOR on
the receiver.
2
Press MAIN MENU repeatedly
to select "CUSTOMIZE," then
press the control key.
You can also use MAIN MENU on the
receiver.
3
Move the control key to V/v
select "NAME IN?."
You can also use MENU on the receiver.
4
Press the control key.
The cursor flashes and you can select a
character. Follow the procedure given in
"To create an index name."
1
2