4: Connecting The Antennas (Aerials); 5: Preparing The Receiver And The Remote - Sony STR-DA1500ES Operating Instructions Manual

4: Connecting the
antennas (aerials)
Connect the supplied AM loop antenna
(aerial) and FM wire antenna (aerial).
Before connecting the antennas (aerials), be
sure to disconnect the AC power cord (mains
lead).
r
FM wire antenna (aerial) (supplied)
5: Preparing the receiver
and the remote
cting the AC power cord
d)
Connect the supplied AC power cord (mains
lead) to the AC INLET terminal on the
receiver, then connect the AC power cord
(mains lead) to a wall outlet.
•
*
The shape of the connector varies depending on
the area code of this receiver.
AC power cord
(mains lead)
(supplied)
AC INLET terminal
-----+
To the wall outlet
Notes
• Before connecting the AC power cord (mains
lead), make sure that metallic wires of the speaker
cords are not touching each other between the
SPEAKERS terminals.
• Connect the AC power cord (mains lead) firmly.
AM loop antenna
(aerial) (supplied)
*
Notes
• To prevent noise pickup, keep the AM loop
antenna (aerial) away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna
(aerial).
• After connecting the FM wire antenna (aerial),
keep it as horizontal as possible.
A several space is left between the plug and the
rear panel even when the power cord (mains
lead) is inserted firmly. The cord is supposed
be connected this way. This is not malfunction.