5: Preparing The Receiver And The Remote - Sony STR-DG300 Operating Instructions Manual

5: Preparing the receiver
and the remote
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
AC power cord
L L
+ – + –
R R
FRONT A FRONT B
SPEAKERS
Notes
• Install this system so that the power cord can be
unplugged from the wall socket immediately in the
event of trouble.
• The AC OUTLET on the rear of the receiver is a
switched outlet, which supplies power to the
connected component only while the receiver is
turned on.
• Make sure that the total power consumption of the
component connected to the receiver's AC
OUTLET does not exceed the wattage stated on the
rear panel. Do not connect high-wattage electrical
home appliances such as electric iron, fan, or TV to
this outlet. This may cause a malfunction.
AC OUTLET
AC OUTLET
SWITCHED 100W/0.4A MAX
To the wall outlet
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Be sure to use the buttons on the receiver for
this operation.
1,2
?/1
TUNING MODE
– TUNING +
SPEAKERS
(OFF/A/B/A+B)
VIDEO 3 IN/
PORTABLE AUDIO IN
BASS TREBLE
PHONES
1
Press ?/1 to turn off the
receiver.
2
Hold down ?/1 for 5 seconds.
After "CLEARING" appears on the
display for a while, "CLEARED"
appears.
The following items are reset to their
factory settings.
• All settings for the speaker system and
sound adjustment.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• MASTER VOLUME is set to "VOL
MIN".
• Input is set to "DVD".
MASTER VOLUME
DISPLAY INPUT MODE
INPUT SELECTOR
WOOFER
A.F.D. MOVIE MUSIC DIRECT ON/OFF MUTING
19
GB