Siemens SIMATIC PCS 7 Configuration page 16

2 Configuring and wiring
2.2 Connecting an MTA terminal module
The connection of the ET 200M modules to the MTA is established via the
connecting cable of the correct type, as also shown in the following figure with
an MTA AI as an example.
Figure 2–2
Preassembled cable with SUB-D Preassembled cable with SUB-D
connector for connection to SIEMENS connector for connection to SIEMENS
PCS 7 MTA PCS 7 MTA
Configuration of Redundant I/O Modules
Entry-ID: 28430682, V2.0, 03/2015
2 connections for 2 connections for
redundant construction redundant construction
Screwing terminals Screwing terminals
for direct connection for direct connection
to field devices to field devices
16