3 Configuring the redundant peripherals
3.1 CPU settings
Procedure
Table 3–1
Activity
1.
Open the SIMATIC H station in the HW
Configure.
2.
Select the first used CPU in slot 3 of the
rack (0) and select the menu command
"Edit > Object Properties".
3.
Switch to the "Cyclic Interrupts" tab.
Use the drop down list to select the desired
process picture for those OB cyclic
interrupts, where the channel blocks
are to be installed at a later stage.
Configuration of Redundant I/O Modules
Entry-ID: 28430682,
V2.0,
03/2015
Screenshot
39