Table of Contents
Advertisement
Maintenance
WARNING
Failure to properly maintain the machine could result in premature failure of machine systems
causing possible harm to you or bystanders.
Keep the machine well maintained and in good working order as indicated in these instructions.
Important:
Refer to your engine operator's manual for additional maintenance procedures.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 20 hours
After the first 25 hours
Before each use or daily
After each use
Every 40 hours
Every 50 hours
Every 100 hours
Every 300 hours
Monthly
Yearly or before storage
Every 2 years
Important:
Refer to your Engine Operator's Manual for additional maintenance procedures.
Maintenance Procedure
• Change the reduction-case oil.
• Change the engine oil.
• Inspect the belts and adjust as necessary (belt-drive models only).
• Inspect the air-cleaner elements.
• Check the engine-oil level.
• Inspect the tires.
• Check the reduction-case oil.
• Clean the drum between mixing batches of material.
• Lubricate the trunnions.
• Torque the wheel lug nuts to 108 to 122 N∙m (80 to 90 ft-lb) after towing.
• Inspect the belts and adjust as necessary (belt-drive models only).
• Check the clutch operation
• Clean the air-cleaner elements. Clean them more frequently in dusty operating
conditions.
• Change the engine oil.
• Check the spark plug.
• Clean the spark arrester (if equipped).
• Clean the fuel-sediment cup.
• Change the reduction-case oil.
• Replace the paper air-cleaner element. Replace it more frequently in dusty
operating conditions.
• Replace the spark plug.
• Lubricate the pillow-block bearings.
• Clean the fuel-sediment cup.
• Replace the belts (belt-drive models only).
27
Advertisement
Table of Contents
