Toro MMX-655H-S Operator's Manual page 40

1. Oil-level-check 3. Oil-level port
bolt
2. Washer 4. Pulley
7. Remove the oil-level-check bolt and washer
from the oil-level port in the side of the reduction
case (Figure 58).
8. Align a drain pan to the hinge of the engine deck
(Figure 59).
9. Rotate the engine on the hinge side of the
engine deck, and drain the oil from the reduction
case (Figure 59).
10. Carefully lower the engine and engine deck.
11. Slowly pour the specified oil into the fill port
until the oil level is level with the threads at the
bottom of the oil-level port
12. Install the oil-level-check bolt and washer to the
oil-level port of the reduction case, and tighten
the bolt (Figure 58).
Figure 58
5. Filler port
6. Filler bolt
Figure 59
(Figure 57).
13. Install the filler bolt and washer to the filler port
of the reduction case and tighten the filler bolt
(Figure 58).
14. Install the engine; refer to
(page 36).
g020127
g020128
40
Installing the Engine