Table of Contents
Advertisement
Figure 16
Note:
Use a wrench to keep the bolt from
spinning.
Hitching a Pintle-Hitch Coupler
Figure 17
Connecting the Safety Chains to
the Tow Vehicle
1.
Pull the safety chain through the slots in the
keyholes, so that the lengths on each side are
equal.
2.
Cross both lengths of chain under the tow pole.
Note:
Crossing the chains decreases the
chances of the front of the machine dropping
to the ground if the hitch does not hold the
connection.
g035115
1. Connecting links
2. Keyholes in front post
3.
Connect each length of chain to the safety
chain mounting point on the tow vehicle with the
connecting links
Important:
enough slack for turning around corners
when towing the machine.
Note:
Stow the excess chain inside the bottom
of the front post by pushing it into the keyholes
g035164
and latching the appropriate links into the
keyhole slots.
18
Figure 18
3. Chain crossed under tow
pole
(Figure
19).
Ensure that the chain has
g021177
Advertisement
Table of Contents
