Datacolor SpyderPRINT User Manual page 20

If this is your first time measuring patches in a target, you may want to take the
brief tutorial on how to read the patches. The tutorial will show you the
appropriate speed to read the targets if you're using strip mode, which measures
by row. The other mode you can measure in is patch, which measures by each
color patch. Once you feel comfortable you can begin reading your own target.
Place the Spectro on the first patch on the next line and repeat. Once this page
nd
is finished, click on the 2 page and that will appear, repeat until all pages have
been read.
Once finished you can review your targets, if there is a red box around the patch,
it should be read again, this indicates some sort of an error with that particular
patch. While in the View/Measure mode you can toggle back and forth between
the split and measured mode to see the full size targets and measurements.