Warnings About Battery - Samsung POWERbot SR20J925 Series User Manual

Warnings about battery

You must not remove (or attempt to remove) the battery incorporated in this product on your
own. To replace the battery, you must contact your service provider or an independent qualified
professional. these instructions have been prepared for the exclusive use of your service
provider or independent qualified professional.
WARNING
FOR YOUR OWN SAFETY, DO NOT ATTEMPT TO REMOVE THE BATTERY ON YOUR OWN OR
DISPOSE OF IT IN FIRE. DO NOT DISASSEMBLE, CRUSH OR PUNCTURE THE BATTERY.
How to remove the battery
Remove POWERbot from the charger (station) for disassembling.
You must turn off POWERbot for safety before disassembling.
1
Lay down and invert
POWERbot and then
remove 2 screws.
(Applicable in countries with separate battery return systems.)
The marking on the battery, manual or packaging indicates that the battery in this product should not be
disposed of with other household waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that
the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For information on its replacement,
please contact your service provider. Do not attempt to remove the battery or dispose it in a fire. Do not
disassemble, crush, or puncture the battery. If you intend to discard the product, the waste collection site
will take the appropriate measures for the recycling and treatment of the product, including the battery
2
Remove the dustbin
cover
Correct disposal of batteries in this product
ENGLISH-33
3
Remove the battery
from the slot and
disconnect the
connector.